Penetrant Testing on Horizontal Rectangular Steam Sterilizers in Use
![](/skin/Gold/line_sep1.gif)
摘 要
对在用蒸汽灭菌器使用工况进行了分析。用渗透检测方法对灭菌器可能产生裂纹的重点部位的焊缝、角焊缝内表面进行了检测。分析和处理了角焊缝上产生的裂纹。应用表明, 在用压力容器定期检验中必须对焊缝内表面进行渗透检测, 才能保证容器的使用安全。
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
Abstract
The performance of steam sterilizers in use was analyzed, and the inner surfaces of welding seams and fillet welding seams in the key parts were inspected by penetrant testing method and the cracks often occurring on the fillet weld were analyzed and proceeded. Therefore, it is essential to carry out penetrant testing on inner surfaces of welding seams so as to guarantee the safety while in use.
中图分类号 TG115.28
所属栏目 实践经验
基金项目
收稿日期 2010/4/12
修改稿日期
网络出版日期
![](/skin/blank.gif)
作者单位点击查看
![](/skin/blank.gif)
备注凌永海(1953-), 男, 工程师, 主要从事压力容器检验及无损检测工作。
引用该论文: LING Yong-Hai. Penetrant Testing on Horizontal Rectangular Steam Sterilizers in Use[J]. Nondestructive Testing, 2010, 32(8): 653~654
凌永海. 在用卧式矩形蒸汽灭菌器的渗透检测[J]. 无损检测, 2010, 32(8): 653~654
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
![请选择您对本文的评价](/skin/Gold/evaluation/ev_01.gif)
![您认为本文一无是处!](/skin/Gold/evaluation/ev_02.gif)
![您认为本文较差,没啥用!](/skin/Gold/evaluation/ev_03.gif)
![您认为本文一般,没太大参考价值](/skin/Gold/evaluation/ev_04.gif)
![您认为本文尚可,值得参考](/skin/Gold/evaluation/ev_05.gif)
![您认为本文很好,值得推荐](/skin/Gold/evaluation/ev_06.gif)
参考文献
【1】TSG R7001—2004 压力容器定期检验规则[S].
【2】JB/T 4730.5—2005 承压设备无损检测[S].
【3】郑东旭, 高权民.方型蒸汽消毒柜内胆产生裂纹的原因探讨[J].机械研究与应用, 2003, 16(增): 49.
【2】JB/T 4730.5—2005 承压设备无损检测[S].
【3】郑东旭, 高权民.方型蒸汽消毒柜内胆产生裂纹的原因探讨[J].机械研究与应用, 2003, 16(增): 49.
相关信息