搜索热:裂纹 硫酸
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
新型双丝像质计设计
          
The Design for the New Image Quality Indicator of Duplex Wire Type

摘    要
从射线检测的一般理论,提出了新型双丝像质计设计的理论。试验证明,所提出的理论可以用于指导新型双丝像质计的设计。该像质计可克服标准型双丝像质计只能得到一些特定的不清晰度值问题,并可测量更大范围的不清晰度。
标    签 射线照相   射线实时成像检测   双丝像质计   丝型像质计   不清晰度   Radiography   Radioscopy   Duplex wire IQI   Wire IQI   Unsharpness  
 
Abstract
The theory for designing image quality indicator of duplex wire type was given on the basic theory of radiography. The theory of design had been shown as ture by the experiment. The new image quality indicator of duplex wire type enabled not only to determine more wide unsharpness value than the standard type, but it cleared out also the problem that the value of unsharpness determined was only specific by standard image quality indicator of duplex wire type.

中图分类号 TG115.28

 
  中国光学期刊网论文下载说明


所属栏目 科研成果与学术交流

基金项目

收稿日期 2006/12/3

修改稿日期

网络出版日期

作者单位点击查看

备注郑世才(1941-),男,研究员,长期从事射线检测工作,著有多本射线检测书籍和论文。

引用该论文: ZHENG Shi-cai. The Design for the New Image Quality Indicator of Duplex Wire Type[J]. Nondestructive Testing, 2007, 29(12): 701~704
郑世才. 新型双丝像质计设计[J]. 无损检测, 2007, 29(12): 701~704


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】BS 3971:1980 Image quality indicators for industrial radiography[S].
 
【2】EN 462-5:1996 Non-destructive testing-Image quality of radiographs Part 5: Image quality indicators(duplex wire type), determination of image unsharpness value[S].
 
【3】ASTM E2002—1998(2003) Standard practice for determining total image unsharpness in radiology[S].
 
【4】ISO 19232-5:2004 Non-destructive testing-Image quality of radiographs Part 5: Image quality indicators(duplex wire type), determination of image unsharpness value[S].
 
【5】郑世才.射线检测[M].北京:机械工业出版社,2004.
 
相关信息
   标题 相关频次
 数字射线检测技术专题(三)——成像过程基本理论
 5
 对ASTM E1742—2008标准射线照相质量级别规定的讨论
 4
 数字射线检测技术专题(六)——等价性问题讨论
 3
 数字射线检测技术专题(四)——数字射线图像基本理论
 3
 数字射线检测技术专题(五)——数字射线检测基本技术
 3
 X射线管焦点尺寸的测量
 2
 X射线机不是计量器具
 2
 X射线机焦点尺寸测量方法的标准分析
 2
 不清晰度的测量
 2
 对《射线检测小径管的灵敏度对比试验》一文的看法
 2
 固体火箭发动机射线照相缺陷定位法
 2
 关于X射线机的透照灵敏度
 2
 厚板焊缝TOFD检测及其与传统检测方法的比较
 2
 几何放大对DR成像质量的影响
 2
 可检验的最小气孔尺寸的确定方法
 2
 数字射线检测技术(六)——数字射线检测技术标准介绍
 2
 数字射线检测技术(四)——等价技术级别评定
 2
 数字射线检测技术(五)——补偿规则说明
 2
 数字射线检测技术(五)——补偿规则说明
 2
 数字射线检测技术专题(二)——辐射探测器介绍
 2
 数字射线检测技术专题(三)——技术级别近似设计
 2
 数字射线检测技术专题(一)——概述
 2
 数字射线检测技术专题(一)——概述
 2
 钛合金SPF/DB 3层结构制件的射线检测
 2
 最佳黑度的误导
 2
 9Ni钢滤波法优化射线照相
 1
 9Ni钢滤波法优化射线照相
 1
 Retinex可变框架在X射线图像增强中的应用
 1
 X射线数字成像技术中成像板物距的测量
 1
 薄壁圆环激光焊缝X射线实时成像检测应用
 1