Application of IR Technology on Energy Efficiency Test of Lightweight Wooden Structures
![](/skin/Gold/line_sep1.gif)
摘 要
以一栋2层轻型木结构建筑为例,使用红外热像仪对该建筑进行检测,分析了轻型木结构建筑中存在的热工缺陷。结果表明:轻型木结构建筑中主要存在墙体墙骨柱处保温层分布不均、墙体转角部位的热桥、百叶窗漏气等缺陷;红外热成像检测技术是轻型木结构节能检测的一种有效手段。
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
Abstract
In this paper, a two-story lightweight wood structure building is taken as an example, and the infrared thermal imager is used to inspect the building to analyze the thermal defects existing in the wooden structure. The results show that there are some defects in the light-weight wooden structure, such as uneven distribution of insulation at the wood stud, thermal bridge in the corner and air leakage in the louver. It shows that infrared technology is an effective means of energy saving detection of lightweight wooden structure.
中图分类号 TG115.28 DOI 10.11973/wsjc201909004
所属栏目 无损检测新技术发展与应用专题
基金项目 “十二五”农村领域国家科技计划资助项目(20158BAL03B03-03)
收稿日期 2019/3/6
修改稿日期
网络出版日期
![](/skin/blank.gif)
作者单位点击查看
![](skin/blank.gif)
![](/skin/blank.gif)
备注尹琴(1993-),女,硕士研究生,主要从事木结构建筑技术研究
引用该论文: YIN Qin,ZHANG Yinglu,SHEN Hui,GUO Yingkai,LU Hongyan,ZHU Yixin. Application of IR Technology on Energy Efficiency Test of Lightweight Wooden Structures[J]. Nondestructive Testing, 2019, 41(9): 16~19
尹琴,张颖璐,沈卉,郭颖恺,陆红燕,朱一辛. 红外技术在轻型木结构建筑节能检测中的应用[J]. 无损检测, 2019, 41(9): 16~19
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
![请选择您对本文的评价](/skin/Gold/evaluation/ev_01.gif)
![您认为本文一无是处!](/skin/Gold/evaluation/ev_02.gif)
![您认为本文较差,没啥用!](/skin/Gold/evaluation/ev_03.gif)
![您认为本文一般,没太大参考价值](/skin/Gold/evaluation/ev_04.gif)
![您认为本文尚可,值得参考](/skin/Gold/evaluation/ev_05.gif)
![您认为本文很好,值得推荐](/skin/Gold/evaluation/ev_06.gif)
参考文献
【1】杨红, 何建宏, 喻娅君. 红外热像仪及其在建筑节能检测中的应用[J].新型建筑材料,2003,30(4):50-51.
【2】FOX M, GOODHEW S, DE W P. Building defect detection:external versus internal thermography[J]. Building and Environment, 2016, 105:317-331.
【3】鲍凯, 王俊涛, 吴东流, 等. 新兴的无损检测技术:红外热波成像检测[J]. 无损检测, 2006, 28(8):393-398, 408.
【4】杨丽萍, 闫增峰, 孙立新, 等. 红外热成像技术在建筑外墙热工缺陷检测中的应用[J]. 新型建筑材料, 2010, 37(6):53-57.
【5】王杨洋. 红外技术在建筑热工性能检测中的应用研究[D]. 哈尔滨:哈尔滨工业大学, 2005.
【6】MARTIN S,KAREL K,JAN T. Defining of thermal bridges of wood building and their elimination[J]. Wood Research,2016,61(4):607-614.
【7】ZHEN M, ZHANG B. Energy performance of a light wood-timber structured house in the severely cold region of China[J]. Sustainability,2018, 10:1501.
【8】王凯, 严伯刚, 张泓源, 等. 红外热像无损评估技术在建筑工程中的应用[J]. 混凝土, 2015(5):154-157, 160.
【9】曹平华. 红外热成像技术在建筑外墙检测中的应用[J]. 无损检测, 2017, 39(2):26-29, 33.
【2】FOX M, GOODHEW S, DE W P. Building defect detection:external versus internal thermography[J]. Building and Environment, 2016, 105:317-331.
【3】鲍凯, 王俊涛, 吴东流, 等. 新兴的无损检测技术:红外热波成像检测[J]. 无损检测, 2006, 28(8):393-398, 408.
【4】杨丽萍, 闫增峰, 孙立新, 等. 红外热成像技术在建筑外墙热工缺陷检测中的应用[J]. 新型建筑材料, 2010, 37(6):53-57.
【5】王杨洋. 红外技术在建筑热工性能检测中的应用研究[D]. 哈尔滨:哈尔滨工业大学, 2005.
【6】MARTIN S,KAREL K,JAN T. Defining of thermal bridges of wood building and their elimination[J]. Wood Research,2016,61(4):607-614.
【7】ZHEN M, ZHANG B. Energy performance of a light wood-timber structured house in the severely cold region of China[J]. Sustainability,2018, 10:1501.
【8】王凯, 严伯刚, 张泓源, 等. 红外热像无损评估技术在建筑工程中的应用[J]. 混凝土, 2015(5):154-157, 160.
【9】曹平华. 红外热成像技术在建筑外墙检测中的应用[J]. 无损检测, 2017, 39(2):26-29, 33.
相关信息
标题 | 相关频次 | |
![]() | 道路质量的红外热成像检测现状 | 2 |
![]() | 反应堆压力容器接管-安全端异种钢焊缝直射纵波超声检测方法 | 1 |
![]() | 厚壁焊缝横向裂纹的超声波判别方法 | 1 |
![]() | 输变电工程重大危险源风险及应急管理 | 1 |
![]() | 提高工业数字射线图像对比度及信噪比的工艺措施 | 1 |