Broken Reason Analysis on Toothed Plate of Cable Cutters
![](/skin/Gold/line_sep1.gif)
摘 要
采用宏观分析、金相检验、硬度测试、化学成分分析、扫描电镜观察及X射线衍射分析等检测手段, 对某批电缆断线钳齿板出现批量断齿的原因进行了分析。结果表明: 齿板断齿主要是高温回火脆性和精铸时形成的大量缩松缺陷引起的, 而成分偏析引起的非金属夹杂物、磷共晶及Fe-Cr-Mn化合物等各种脆性化合物促进了齿板断齿的发生。最后提出了改进措施。
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
![](flash/relate.gif)
Abstract
Batch fracture reasons of a batch of toothed plate of cable cutters were analyzed by macro examination, metallographic examination, hardness testing, chemical compositions analysis, SEM observation and XRD analysis. The results show that high temper brittleness and heavy shrinkage porosity in fine casting were the main reasons for the fracture, and non-metallic inclusions, phosphorus eutectic structure and Fe-Cr-Mn compound caused by elements segregation accelerated the fracture. At last, the perfection measures were put forward.
中图分类号 TG93
所属栏目
基金项目
收稿日期 2010/11/22
修改稿日期
网络出版日期
![](/skin/blank.gif)
作者单位点击查看
![](/skin/blank.gif)
备注白宝忠(1964-),男,工程师。
引用该论文: BAI Bao-zhong,QIAN Jian-guo,YAN Yang-yang,YAO Yong-hong,ZOU En-xin. Broken Reason Analysis on Toothed Plate of Cable Cutters[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2011, 47(8): 518~521
白宝忠,钱建国,燕样样,姚永红,邹恩新. 电缆断线钳齿板断齿原因分析[J]. 理化检验-物理分册, 2011, 47(8): 518~521
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
![请选择您对本文的评价](/skin/Gold/evaluation/ev_01.gif)
![您认为本文一无是处!](/skin/Gold/evaluation/ev_02.gif)
![您认为本文较差,没啥用!](/skin/Gold/evaluation/ev_03.gif)
![您认为本文一般,没太大参考价值](/skin/Gold/evaluation/ev_04.gif)
![您认为本文尚可,值得参考](/skin/Gold/evaluation/ev_05.gif)
![您认为本文很好,值得推荐](/skin/Gold/evaluation/ev_06.gif)
参考文献
【1】李炯辉. 金属材料金相图谱[M]. 北京:机械工业出版社, 2006.
【2】燕样样. 蜗轮的失效分析[J]. 热加工工艺,2008,37(9):91,103.
【3】袁翠娥. ZG35CrMnSi精铸件机械性能不合格原因分析[J]. 航空制造技术,1990(6):14-19.
【4】咸阳机器制造学校. 钢的热处理[M]. 北京:机械工业出版社,1979.
【5】赵建康. 铸铁铸钢及其熔炼[M]. 北京: 机械工业出版社, 2007.
【2】燕样样. 蜗轮的失效分析[J]. 热加工工艺,2008,37(9):91,103.
【3】袁翠娥. ZG35CrMnSi精铸件机械性能不合格原因分析[J]. 航空制造技术,1990(6):14-19.
【4】咸阳机器制造学校. 钢的热处理[M]. 北京:机械工业出版社,1979.
【5】赵建康. 铸铁铸钢及其熔炼[M]. 北京: 机械工业出版社, 2007.
相关信息