搜索热:马鸣图 变质
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
等离子喷涂羟基磷灰石涂层残余应力的研究进展
          
Research Progress on Residual Stress of Plasma Sprayed Hydroxyapatite Coatings

摘    要
综述了国内外等离子喷涂羟基磷灰石(HA)涂层残余应力的研究现状,主要分析了残余应力对HA涂层性能的影响及其残余应力产生原因,讨论了等离子喷涂工艺和涂层材料及结构对涂层中残余应力的影响,简要介绍了几种用于涂层残余应力的测试方法,并提出了今后HA涂层残余应力研究的重点和方向.
标    签 等离子喷涂   羟基磷灰石   残余应力   涂层   plasma spray   hydroxyapatite   residual stress   coating  
 
Abstract
The current research status of the residual stress in plasma sprayed hydroxyapatite(HA) coatings is summarized.The effect of the residual stress on properties of the HA coatings and the formation cause of the residual stress are mainly analyzed.The effects of the spraying process,coating material and structure on the residual stress in the coating are discussed.The experimental techniques for the residual stress measurement are briefly described.Finally,the key point and the development trend on residual stress of HA coating are suggested.

中图分类号 TG174.442 TB333

 
  中国光学期刊网论文下载说明


所属栏目 残余应力

基金项目 国家自然科学基金资助项目(50805002);教育部留学人员启动基金资助项目

收稿日期 2009/6/30

修改稿日期 2010/5/6

网络出版日期

作者单位点击查看

备注郭天旭(1982-),男,黑龙江哈尔滨人,硕士研究生.

引用该论文: GUO Tian-xu,LI Hui,WEI Qi,LI Hong,LI Zhuo-xin. Research Progress on Residual Stress of Plasma Sprayed Hydroxyapatite Coatings[J]. Materials for mechancial engineering, 2010, 34(9): 94~97
郭天旭,李辉,魏琪,李红,栗卓新. 等离子喷涂羟基磷灰石涂层残余应力的研究进展[J]. 机械工程材料, 2010, 34(9): 94~97


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】MORONI A,CAJA V L.Histomorphometry of hydroxyapatite coated and uncoated porous titanium bone implants[J].Biomaterials,1994,15:926-930.
 
【2】ALEXANDRA E P,PUNAM T,HOBBS L W,et al.Bone bonding to hydroxyapatite and titanium surfaces on femoral stems retrieved from human subjects at autopsy[J].Bioma-terials,2004,25:5199-5208.
 
【3】GROSS K A,BERNDT C C.Thermal processing of hydroxyapatite for coating production[J].Biomed Mater Res,1998,39:580-587.
 
【4】TOPIC M,NTSOANE T,HEIMANN R B.Microstructural characterisation and stress determination in as-plasma spray and incubated bioconductive hydroxyapatite coatings[J].Surface and Coating Technology,2006,201:3633-3641.
 
【5】HAN Y,NAN J,XU K,et al.Dissolution response of hydroxyapatite coatings to residual stresses[J].Biomed Mater Res,2001,55:296-602.
 
【6】STECURA S.Two-layer thermal barrier coatings I:effects of composition and temperature on oxidation behavior and failure[J].Thin Solid Film,1989(1/2):121-140.
 
【7】KNOTEK O,ESING R,STROMPEN N.On the properties of plasma-sprayed oxide and metal-oxide coatings[J].Thin Solid Films,1984(4):457-466.
 
【8】KURODA S,CLYNE T W.The origin and quantification of the quenching stress associated with splat cooling during spray deposition[C]//Proc.2nd Plasma-Technik Syrap.Wohlen:Plasma-Technik,1991:273-284.
 
【9】CLYNE T W,GILL S C.Residual stresses in thermal spray coatings and their effect on interfacial adhesion:a review of recent work[J].Journal of Thermal Spray Technology,1996(5):401-418.
 
【10】TSUI Y C,DOYLE C,CLYNE T W.Plasma sprayed hydroxyapatite coatings on titanium substrates Part 1:mechanical properties and residual stress levels[J].Bioma-terials,1998,19:2015-2029.
 
【11】徐滨士,刘世参.中国材料工程大典[M].北京:化学工业出版社,2006.
 
【12】COFINO B,FOGARASSY P,MILLET P,et al.Thermal residual stresses near the interface between plasma-spray hydroxyapatite coating and titanium substrate:finite element analysis and synchrotron radiation measurements[J].Biomed Mater Res A,2004,70:20-27.
 
【13】RAVAGLIOLI A,KRAJEWSKI A.Bioceramics:materials,properties,application[M].London:Chapman and Hall,1992.
 
【14】郑学斌,黄民辉,黄静琪,等.喷涂距离和喷涂功率对羟基磷灰石涂层的影响[J].无机材料学报,1999,14(5):783-788.
 
【15】KURODA S,CLYNE T W.The quenching stress in thermally sprayed coatings[J].Thin Solid Films,1991,200:49-66.
 
【16】YANG Y C.Influence of residual stress on bonding strength of the plasma-sprayed hydroxyapatite coating after the vacuum heat treatment[J].Surface and Coatings Technology,2007,201:7187-7193.
 
【17】GU Y W,KHOR K A,PANB D,et al.Activity of plasma sprayed yttria stabilized zirconia reinforced hydroxyapatite/Ti-6Al-4V composite coatings in simulated body fluid[J].Biomaterials,2004,25:3177-3185.
 
【18】KHOR K A,GU Y W,QUEK C H,et al.Plasma spraying of functionally graded hydroxyapatitey/Ti-6Al-4V coatings[J].Surface and Coatings Technology,2003,168:195-201.
 
【19】CHOU B Y,CHANG E.Plasma-sprayed hydroxyapatite coating on titanium alloy with ZrO2 second phase and ZrO2 intermediate layer[J].Surface and Coatings Technology,2002,153:84-92.
 
【20】GUIPONT V,ESPANOL M,BORIT F,et al.High-pre-ssure plasma spraying of hydroxyapatite powders[J].Materials Science and Engineering A,2002,325:9-18.
 
【21】王亮,王铀,田伟,等.等离子喷涂纳米结构与传统结构热障涂层的残余应力对比研究[J].材料保护,2009,42(3):3-8.
 
【22】MILLET P,GIRARDIN E,BRAHAM C,et al.Stress influence on interface in plasma-sprayed hydroxyapatite coatings on titanium alloy[J].Biomed Mater Res,2002,60:679-683.
 
【23】SERGO V,SBAIZERO O,CLARKE D R.Mechanical and chemical consequences of the residual stresses in plasma sprayed hydroxyapatite coatings[J].Biomaterials,1997,18:477-482.
 
【24】马维,潘文霞,张文宏,等.热喷涂涂层中残余应力分析和检测研究进展[J].力学进展,2002,32(1):41-56.
 
【25】MATEJICEK J,SAMPATH S.In situ measurement of residual stresses and elastic moduli in thermal sprayed coatings part 1:apparatus and analysis[J].Acta Mater,2003,51:863-872.
 
相关信息
   标题 相关频次
 铁颗粒在等离子喷涂过程中的氧化行为
 8
 等离子喷涂制备羟基磷灰石复合梯度涂层研究进展
 7
 H13钢外套早期开裂分析
 4
 P92钢焊接接头性能及其焊接材料研究进展
 4
 含非晶相铁基涂层的制备及性能
 4
 碳/碳复合材料表面等离子喷涂羟基磷灰石涂层的形貌与相组成
 4
 先进航空钛合金中温钎焊技术的研究进展
 4
 不锈钢埋弧焊金属芯焊丝的研制及其工艺性能
 3
 碳/碳复合材料表面制备羟基磷灰石涂层的研究进展
 3
 铸件残余应力的测定和消除方法
 3
 16MnD5钢板焊接件热影响区开裂原因分析
 2
 16MnR钢板焊接对接接头残余应力磁记忆检测研究
 2
 17Cr2Ni2Mo钢的表面复合喷丸强化
 2
 18Cr2Ni4WA钢氮化和喷丸强化处理的残余应力及性能
 2
 20#钢在三元复合驱弱碱体系采出液中的腐蚀与防护
 2
 2A14铝合金去应力热时效的作用
 2
 300M钢热损伤的巴克豪森检测
 2
 304不锈钢薄壁焊管表面残余拉应力的测定及消除
 2
 304不锈钢焊管应力腐蚀开裂原因
 2
 45Cr4NiMoV钢支承辊锻件表面感应淬火后的残余应力分布
 2
 AISI403钢电站汽轮机叶片喷丸残余应力分布
 2
 C/C复合材料高温抗烧蚀涂层的研究进展
 2
 CdSe/石墨烯/TiO2纳米管复合膜的制备及其对金属的保护性能
 2
 CdSe-TiO2复合材料对304不锈钢的光生阴极保护性能
 2
 Cr4Mo4V钢制轴承套圈磨削变质层深度的测定
 2
 DD3镍基单晶高温合金喷丸层残余应力的X射线衍射分析
 2
 DD3镍基单晶高温合金喷丸强化后残余应力的有限元模拟
 2
 FBE与聚苯胺粉末共混涂层的防腐蚀性能
 2
 H型钢空冷过程中残余热应力的有限元分析
 2
 Inconel 625镍基合金管道焊接残余应力的数值模拟
 2